Pulsar PG8098 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 2)

Introduction

General Overview

The purpose of this guide is to familiarize

installation and maintenance personnel with the

electrical functions of the Pulsar IV and to assist

in the "troubleshooting" of any electrical failures

that may occur.

The Pulsar IV incorporates six electrical

components and their associated wiring. Each

component is critical in the safe operation and

dispensing of the chlorinated solution.

Transformer:

The electrical system operates from a 24 Volt AC

source provided by a U.L.-listed class-II energy-

limiting step-down transformer. The

transformer's primary coil (the side connected to

the 120 Volt source) is designed to "open like a

fuse" when the transformer's VA (Volt Amp.)

rating is exceeded.

When the primary coil opens the 24 Volt source is

removed from the secondary electrical

components, preventing over-heating of

components, wiring and possible electrical shock

hazard.

Junction Box:

The transformer, Lid Shut-off Switch , Electronic

Overflow Switch and Solenoid/Timer Assembly

are wired to the junction box terminal strip (Fig. 1

& 2). A relay is mounted in the junction box to

remove the 24 Volt supply from the

Solenoid/Timer Assembly if the chlorinator lid is

removed or if the chlorinator tank overfills.

Lid Shut-off Switch:

When the chlorinator lid is opened the Lid Shut-

off Switch energizes the junction box relay which

removes the 24 Volt source from the

Solenoid/Timer assembly and causes the water

solenoid valve to close (refer to manual for

picture).

Figure 1 Junction box terminal strip

Figure 2 External wiring Junction Box Terminal

Strip

Electronic Overflow Switch:

When the water level reaches a pre-determined

height in the chlorinator tank the Electronic

Overflow Switch energizes the junction box relay

removing the 24 Volt source from the

Solenoid/Timer Assembly which causes the water

solenoid valve to close (refer to manual for

picture).

1 2 3 4 5

Kommentare zu diesen Handbüchern

Keine Kommentare

Pulsar PG8098 Anleitung zur Fehlerbehebung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Pulsar PG8098